Corset Making Adventures

The Party Dress BookInspired by The Great British Sewing Bee, and with Simon Henry’s “Party Dress Book” as my guide I have created my first corset / basque.

In true upcycling manner, it was made from an old bridesmaid dress and with the addition of a cute cotton lining it’s totally reversible –  turning it inside out  gives a completely different look.

Finished Corset Frontfinished corset backDSC02208

Do you want to see how it was made?

Firstly, a toile / body block was created – the book recommended doing this over a tight fitting T-shirt which has been previously marked with a vertical line down the front (centre front) and the back (centre back). As well as giving you a reference line, the T-shirt gives you something to pin to. To make the front of the toile the ‘models’ measurements are used to mark the bust point, the fabric is pinned in place, neck line cut and additional pins are used to remove excess fabric until the toile fits snuggly. Two pieces of elastic, one positioned at the waist and the other at the widest part of the hips helps when drawing in further guide lines.

Pinning Toile through bust point Using elastic to mark hips and waist

The back toile piece is fitted in a similar manner and once happy with the fit, the toile pieces are unpinned and cut along the dart and seam lines to create four pattern pieces.

1st ToileCut 1st Toile (2)

Step 2 is to create a full body block (Step 1 gives you half) by placing the 4 pattern pieces onto a folded piece of calico, which are then drawn around and cut out.

Marking 2nd Toile

The pattern pieces (7 in total as the centre front panel is cut on the fold) are sewn together, popped on your model and adjusted at the seams until you have a smooth and close body fit. The photo below shows the full body block on its first fitting – you can see the toile needs to be adjusted as it is gathering at the arm socket.

Toile 1st fitting

This full body block is used to make the corset pattern pieces – the photo below shows the corset toile. A little bit of spray starch helps to stablize the fabric.

Corset Toile

Again the toile is unpicked and pieces used as a template.

Bodice Lining.

The corset itself is made from 3 layers: the main fabric, lining and interlining.

3 Corset pieces

The interlining is the layer that the ‘bones’ are stitched to.

Adding Boning

The loops can be made from either ribbon or rouleau loops – as this was my first corset / basque and I didn’t have a rouleau hook I opted for some satin ribbon.

Adding Ribbon Loops

Once all 3 layers are stitched together, the edges are neatened with some bias binding.

Corset Top without bindingCorset red flatCorset heart flat

The corset is ready to be laced!

  Corset frontCorset Back

Corset reverse (2)Corset reverse back

Now for that skirt…….Puff Ball?

14 thoughts on “Corset Making Adventures

Leave a Reply to Patch Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s